The Shipping and Handling charge is $4.00 or $2.00 depending on what else you buy.
See "Discounts on Shipping and Handling" at the bottom of this AD.
This is a NEW cover for a large cruiser type seat. The color is white. It is imitation sheepskin. It has foam rubber padding. It has a drawstring at the bottom which you pull tighter and tie the ends after you have put the cover on the seat. The brand is SUNLITE. It is in the factory package. A seat IS NOT included with this seat cover.
I think this cover will go on seats from about 10" x 9" to about 10 1/2" x 10 1/2", but I cannot guarantee that it will go on any seat that is within that size range.
I put it on a seat that is 10 1/2" x 10 1/2" and it went on very well. The cover went down about 4 1/2" all around on the sides. On most seats, that would be enough to cover the entire sides and back of the seat. On the seat I put it on, the cover went down about 1/2" below the bottom of seat platform so that when I pulled the drawstring, the edges of the cover were pulled inward under the seat so that the cover would not come off unless the drawstring was loosened. The drawstring goes all around the edges of the cover.This cover will go on seats that are somewhat smaller than the seat I put it on because the drawstring pulls the edges of the cover under the seat. But, I cannot guaranteed what size seats it will go on because I have not seen the seats. If your seat is larger than 10 1/2" x 10 1/2", do not buy this cover because I am afraid that the cover would not go on the seat.
By my measurements, the length (front to back) of the foam pad is about 10". The length of the furry part of the cover is more than 10". The width (side to side ) of the foam pad is about is 9". The width of the furry part of the cover is more than 9". The foam rubber pad is attached to the cover by glue I suppose. The foam rubber pad goes next to the top of the seat. This cover is not as thick as it looks in the picture because the first picture shows the cover pulled down over the sides of the seat, and the second picture shows the cover with the drawstrings pulling the edges of the cover down and under the top of the cover.
The thickness of the foam rubber pad is about 1 1/2" (one and one-half inches) before it is mashed down by someone sitting on it.
Description by Manufacturer:
With foam padding
Size (Length x Width): 10.5" x 10.25".
My comments: The manufacturer says the size is 10 1/2" x 10 1/4". I believe that is the size seat they are saying it will go on. I have put it on seats that are a little smaller than that, but I cannot guarantee what size seats it will go on because I have not seen the seats.
>> Shipping: We will send this item by First Class Mail with tracking within 2 business days after receiving cleared payment. The payment is usually cleared by Paypal immediately upon payment. If payment is made by e-check we ship as soon as Paypal tells us we may ship.
Usually, the Postal Service delivers within 2 to 6 days after shipment, but sometimes it takes them longer than that to deliver.