The Shipping and Handling charge is $2.95 or $1.50 depending on what else you buy.
See "Discounts on Shipping and Handling" at the bottom of this AD.
> > DESCRIPTION:
This is a NEW spoke wrench. It is round and has 8 different size openings in it to fit different size spoke nipples. This is a good quality spoke wrench. It was made in Japan for the SUNLITE CYCLING brand, but there is no brand name on it. It does not come in a factory package because we buy them in bulk. It is supposed to fit most sizes of spoke nipples.
I measured the widths of each slot with a caliper, and these are the widths according to my measurements: 3.2 mm, 3.3 mm, 3.5 mm, 3.8 mm, 4 mm, 4.5 mm 5.1 mm, and 5.7 mm.. I could have measured slightly wrong, and this is just to give you an idea about the width of the openings.
You can check to see if one of the slots on this spoke wrench fits your spokes by closing the jaws of an adjustable wrench on the flat part of a spoke nipple, then see if one of the combinations of coins listed below exactly fit between the jaws of the adjustable wrench.
The information below comparing the width of the slots in the wrench to the width of coins is NOT PRECISE and is to give you the APPROXIMATE width of the slots.
The widths of the slots in the spoke wrench are as follows (measure the combined width of the EDGES of the coins): The smallest #15 slot is the width of a nickel and a penny; the other #15 slot is the width of a nickel and a quarter. The next size slot #14 also seems to be very close to the width of a nickel and a quarter. The next size slot #13 is the width of a penny and 2 dimes. The next size slot #12 is the width of 3 pennies. The next size slot #11 is the width of 1 dime, 1 nickel, and 1 penny. The next slot #10 is about the width of 2 quarters and a penny. The largest slot #9 is the width of 4 pennies.
We also have a guide that you can see by the above link which tells how to straighten a wheel that has been bent in a wreck by bending it back using boards or tree limbs and a large adjustable wrench. You can see a video by another seller showing how some of that is done for longer bends on youtube.
> > Shipping: We will send this item by First Class Mail with tracking within 2 business days after receiving cleared payment. The payment is usually cleared by Paypal immediately upon payment. If payment is made by e-check we ship as soon as Paypal tells us we may ship.
Usually, the Postal Service delivers within 2 to 6 days after shipment, but sometimes it takes them longer.
> > Discounts on Shipping and Handling:
The checkout will automatically give the correct amount for S&H if you are buying only ONE of any kind of item and nothing else.
The checkout cannot compute the discounts we give on Shipping and Handling. So if you are ordering more than one item of any kind from us that has a S&H charge, we will need to have Paypal send you an invoice for the correct amount. We will usually have Paypal send the invoice between 4:00 PM and 10:00 PM the same day you order the items, but sometimes is could be the next day before we could have Paypal send the invoice.
The S&H charge will be the full amount for ONE of the item that has the highest S&H charge for one of that item, and the reduced amount that is shown in our ADS for each of all the other different kinds of items that the customer is ordering. You may see an example of how to compute the discount on S&H for multiple purchases by clicking on "About" at the bottom of our ADS; or, see the example below:
> > Example of Combined Shipping Discount:
The customer buys
one of item "A" with S&H $4.00 and $0.01 each additional;
2 of item "B" with S&H of $4.25 and $0.50 each additional;
one of item "C" with S&H $4.25 and $0.75 each additional.
The total S&H charge would be: $4.25 + $0.01 + $0.50 + $0.50 = $5.26
The RETURNS policy is on our ecrater "about us" page.